1129 Cellulose Lithographic Adhesive Tape - DISCONTINUED
Replaced with 637 Splicing and Sheathing Tape Red, 2.6 mils
- 1129 is a dark red dyed release coated cellulose film single coated with a solvent based rubber/resin adhesive with 45µ total thickness. Recommended for edging, masking, stripping and splicing applications.
Suitable for the printing and graphic industry, for photographic films.
Protects orthochromatic films, contact and enlarging papers, printing plates during light exposure.
Ruby red colour allows an accurate positioning of the tape on stored films.
Not suitable for use in conditions of high humidity. In that case refer to 2258.
Clean removal from photographic films
Easy unwind for users
Optically transparent and photographically opaque
Red colour enables easy identification
Service temperature: -10°C to +100°C (up to 130°C for short period)
|TECHNICAL PROPERTIES Unit
|Elongation at Break
|Adhesion to Steel
Roll length : 66 metres
Roll width : 12mm, 15mm, 19mm, 25mm, 38mm, 50mm
Core : 76 mm Cardboard core
Packaging : Sleeve pack (for 12 to 25mm) - Bags (38 and 50mm)
Colour : Dark Red
Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. Cellulose based products are sensitive to heat, moisture and storage conditions. When stored in their original carton at recommended conditions of +23°C and 50 % humidity, the best usage date will be within 6 months from the date of shipment.
Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.
Contact us by phone, fax, e-mail for any adhesive tape requirement
Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: firstname.lastname@example.org