4311 Double Sided Filmic Plate Mounting Tape 100 µm
- 4311 is a 100 µm double sided tape especially designed for flexographic plate mounting. It is based on
a transparent e-PVC carrier and features a high tack pressure sensitive rubber adhesive on both sides. 4311 uses a yellow Siliconised Paper liner.
Mounting of flexographic photopolymer and rubber plates onto cylinder or sleeve.
The special grade rubber adhesive used on 4311 makes that product versatile enough to be used for mounting a variety of combinations of rubber or photopolymer plates with steel cylinders or sleeves
All applications where a 100 µm transparent tape is required to make up the correct plate/tape thickness.
Engineered rubber adhesive allows an easy repositioning during mounting operations and ensures a good bonding on a variety of surfaces.
Plates secured with 4311 will not move, even on extensive print runs.
Easy to remove in one piece after the print run.
Soft, PP corrugated liner for ease of lamination process and removal.
Will not leave any residues on most common surfaces, including grounded rubber plates.
|TECHNICAL PROPERTIES Unit
|Peel adhesion on steel
||Rolls per box
|310 mm x 4.5 m
|310 mm x 25 m
|620 mm x 25 m
|Log 1280 mm x 25 m (useable width 1265 mm)
Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10 °C and 30 °C. Life expectancy can vary with temperature and humidity and a maximum of 1 year is recommended from the date of shipment.
Contact us by phone, fax, e-mail or , for any adhesive tape requirement
Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: email@example.com