|TECHNICAL PROPERTIES Unit||Nominal Value|
|Total Thickness Mils (mm)||2.6 (0.066)|
|Adhesive Thickness Mils (mm)||1.1 (0.028)|
|Substrate Thickness (PET) Mils (mm)||1.5 (0.038)|
|Peel Adhesion (PSTC 101 Mod/180°) Initial to SS (20 min dwell) Oz/Inch (N/25mm)||32 (8.8)|
|Tensile Strength PSI||28 000|
|Maximum Continuous Use Temperature °F (°C)||200 (93)|
|Minimum Application Temperature °C (°F)||10 (-12)|
Application to Surface: Unwind adhesive film or tape and apply the adhesive side to the mounting surface. Apply firm pressure. Recommended application temperature to achieve best results is 65°F (18°C) or above. Proper bonding may not occur unless adhesive and surface material are both at 65°F (18°C) or above.
1. When applying pressure sensitive adhesive films to any surface, be sure that the surface is free from oil or other surface contaminants such as powder, dust, or release agents. Adhesive performance should be carefully checked when used on substrates containing plasticizers.
2. Shelf life is one year from date of shipment when stored in a cool dry place below 76°F (24°C). Rolls should be stored on end.
Contact us by phone e-mail for any adhesive tape requirement
Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 921000 ~ E-mail: email@example.com