E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin



 


Electrical Sealing Putty 35

DESCRIPTION:
Electrical Sealing Putty 35 is a soft, conformable, insulating putty in roll form or in pads. Its colour is grey.

APPLICATIONS:


PRODUCT BENEFITS:
TECHNICAL PROPERTIES:

Unit
Nominal Value
Test Method
Thickness
mm
3.0
Tensile Strength
MPa
0.04
BS 903
Dielectric Strength
(short time method)
kV/mm
25
ASTM D149
Volume Resistivity
Ohm.m
1.0 x 10 ¹²
ASTM D257

STANDARD PRESENTATION:

RECOMMENDATIONS:
Care should be taken to avoid direct contact between the tape and petroleum-type solvents and oils.
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Under these conditions, the storage life of the tape in a temperate climate will be at least three year.


Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk