88-01 HT Polyester Acrylic Splicing Tape - Clear
DATA SHEET

General Description

Based on a clear Polyester film coated with an acrylic adhesive and a silicone release coat.

The tape has been specially designed for the top splice of casting papers as used in the production of PVC synthetic leather.

The adhesive offers excellent adhesion to release coated casting papers for PVC castings and the tape enables easy separation of the synthetic leather. The Splicing Tapes will withstand the temperature conditions encountered in the production of synthetic leather and will last through six or seven production cycles. What this means is that the tape can go through the production process 6-7 times, so when the casting paper is reused, the tape can also be reused too.

The tape is designed for casting papers producing PVC synthetic leather. It will withstand temperature conditions used in this process, which can be around 220 deg C for brief periods.

Note:
Adhesion can be improved by applying tape with a plastic applicator (available free on request). Under cold conditions a warm iron pressed over the tape will also improve adhesion. Storage: Use within 12 months and store in dry conditions and in original packaging. Protect from water / humidity / extreme temperatures and direct sunlight.

Average Specification
	Thickness - Film 0.038mm Film 0.038mm Total 0.076mm Elongation - 100% Adhesion to Steel- - 10N/25mm after 20 minutes 22N/25mm after 72 minutes Temperature Resistance Service Temperature -50 - 150 deg C Short Term 220 deg C ___________________________________________________________________________________
Dimensions Available
	72mm x 66m (16 rolls per case) Case details: 28x28x32cm/9kg ___________________________________________________________________________________

---

Contact us by phone, fax, e-mail or skype , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk