E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin



 


Toffee Tape - Rubber Resin Adhesive
SAFETY DATA SHEET
(date of issue : 31.05.2013)

General Description

A solvent free rubber resin based hot melt adhesive. Toffee Tape is supplied in amber colour in a strip form on an easily removed liner.

Applications

  • Jointing of plastic sheeting, filter membranes, damp proof membranes etc.
  • Bonding lightweight insulation panels, kickplates etc.
  • Mounting lightweight trim.
  • Bonding of insulation walls.
  • Joining of plastic sheeting.
  • Fixing of edgings, sheeting, signs and tiles.
  • Fixing roof bars on commercial vehicles.
  • Fixing of carpets, decorative edging and board and trims.

Product Benefits

  • Clean, easy to use alternative to brush on adhesives.
  • Very aggressive pressure sensitive adhesive. Well established product with long term proven success.
  • Non-hardening and permanently flexible. Forms a strong waterproof bond.
  • Excellent strength bond, and no curing time required. Solvent free, therefore no fumes.
  • Ideal for uneven and difficult surfaces such as stucco, block walls and brickwork.
  • Pre-formed to a choice of sizes. Versatile "instant stick" adhesive on a roll.

Average Specifications

Specifications
Available Thickness
0.200mm - 0.8mm
Release liner Thickness
0.080mm
Test Methods
BS 7116
180° peel adhesion
>1000 N/m
Polyester loop tack
>1000 N/m
Liner release
>10 N/m
Elongation at break
4%
Specific Gravity
0.98 g/cm3
Softening Point
85 ° C
Cohesion
0.6mm Nmm2
Tack
(Roller Ball Method)
30mm
Service Temperature
-10 to +60 ° C (apply at 10 ° C and above)
  • Product and Company Identification
 

Product: Toffee Tape - Rubber Resin Adhesive
Company: PR International,3 Kingley Park, Station Road, Kings Langley, Hertfordshire, WD4 8GW, England
Tel: 01923-270508
___________________________________________________________________________________

  • Composition/Information on ingredients
 

Description: Double Sided Tape
Chemical constituents: A Solvent-less adhesive bonding tape based on a blend of synthetic rubber and resin. A white silicone coated paper is used as a liner. The product is wound into rolls.
Hazardous Ingredients: None.
___________________________________________________________________________________

  • Hazards identification
 

Health hazards: No danger to health under normal conditions of use.
Environmental hazards : No particular risk for the environment on condition that the recommendations under "Disposal Considerations" later define.
Physical and chemical hazards: No particular risk
Specific hazards: Hazard warning not required according to the provisions in annex VI of the directive 67/548/CEE
___________________________________________________________________________________

  • First aid measures
 

Inhalation: No special measures required
Skin: Wash with soap and water.
Eyes: Wash out with water
Ingestion: No known toxicity
___________________________________________________________________________________

  • Fire-fighting measures
 

Extinguishing Media: No restriction.
Specific dangers : No specific danger.
Protective Equipment for fire-fighters: No specific equipment required
___________________________________________________________________________________

  • Accidental release measures
 

Individual precautions: No special measures required.
Cleaning and removal: Take up mechanically
___________________________________________________________________________________

  • Handling and storage
 

Manipulation: Respect normal rules for industrial hygiene.
Technical measures for storage : No special measures required.
Storage conditions: Store in a cool dry place between +10°C and +30°C, humidity between 30% and 70%
Incompatible substances: None known
Packaging: Store in original packaging
Packaging materials: Paper or siliconised film – carton
___________________________________________________________________________________

  • Exposure controls / Personal protection
 

Technical measures: No special measures required if good respect of normal rules for industrial hygiene and security.
Individual protection equipment: No special measures required if good respect of normal rules for industrial hygiene and security.
___________________________________________________________________________________

  • Physical and chemical properties
 

Form: Solid. Supplied on a roll.

pH: Not applicable.

Odour: slight.

Boiling Point: Not applicable.

Melting Point: Indistinct. Softens at > 85 ° Centigrade.

Flash Point: Not applicable.

Flammability (Solid, Gas): Not applicable.

Autoflammability: Not Applicable.

Explosive properties / oxidising properties: Not an oxygen carrier according to CEE criteria.

Vapour Pressure: Not applicable.

Specific Gravity: 0.98g/cm3.

Solubility in water: Insoluble.

Soluble in: Aromatic and aliphstic hydrocarbons.

Partition Coefficient: Not applicable.
___________________________________________________________________________________

  • Stability and reactivity
 

Thermal Decomposition: Above 200 ° Centigrade.

Hazardous reactions: No special measures required if good respect of normal rules for industrial hygiene and security.
___________________________________________________________________________________

  • Toxicological information
 

Serious toxicity / Local effects: All the ingredients are essentially non-volatile and of no toxicity. The major ingredients can be regarded as essentially harmless.
___________________________________________________________________________________

  • Ecological information
 

Mobility: No Known hazards.
___________________________________________________________________________________

  • Disposal considerations
 

Destruction / elimination: Incinerate only in purpose built authorised incinerators.

Packaging: Material should be treated as household waste or as recycling material.

Decontamination / cleaning: No necessary cleaning precautions before elimination.

N.B.: Landfill in accordance with local regulationse.
___________________________________________________________________________________

  • Regulatory Information
 

Complies with The Montreal Protocol for the elimination of CFC's

Complies with The US Clean Air Act amendment of 1990

No labeling is required for this material under EEC regulations

___________________________________________________________________________________

0480 > The product can also be supplied in 4kg blocks for extrusion by customers, under our product code "0480".


Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk