1100 Cellulose Adhesive Tape with Rubber Resin Solvent Adhesive
DESCRIPTION:
1100 is a clear release coated cellulose film coated with a rubber/resin solvent based adhesive, with
47mμ total thickness and recommended for general packaging and splicing applications.
APPLICATIONS:
Not suitable for use in conditions of high humidity.
Suitable for general splicing industrial applications with exception of siliconised substrates
Suitable for a variety of domestic packaging and sealing applications at home, at school or in the office
PRODUCT BENEFITS:
Easy unwind
High tack
High clarity
Hand Tear able with Lasting bond
Widths available : 12mm - 50mm
Lengths available : 66m
TECHNICAL PROPERTIES:
Unit
Nominal Value
Adhesion to Steel
N/cm
5.5
Elongation at Break
%
22
Tensile Strength
N/cm
29
Total Thickness
mm
0.043
STANDARD PRESENTATION:
Roll length: 66 Metres
Core: 76 mm Scapa branded cardboard core
Colours: Amber, Note: from light amber to dark amber, due to natural rubber adhesive
Packaging: Sleeve pack (for 12 to 25mm) - Concertina (38 and 50mm)
Roll width: 12mm, 15mm, 19mm, 25mm, 38mm and 50mm
Packaging: rolls packed per case
RECOMMENDATIONS:
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature about 20 ° C and 50% relative humidity, the best usage date will be within 6 months from the date of shipment. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.
Contact
us by phonee-mail for any adhesive tape requirement