Home
PR INTERNATIONAL PR INTERNATIONAL Ltd
Unit 2, Aerial Park, Asheridge road, Chesham, HP5 2ZE, United Kingdom
Telephone : +44 (0) 20 8050 8069
Email : pr@printernational.co.uk
2705 PVC Electrical Adhesive Tape - 0.18mm




APPLICATIONS
  • Primary electrical insulation
  • Protection for low and medium voltage cable splices
  • Colour coding
  • Industrial applications
  • Typically engineered for the professional requirements of telecom and electricity boards
  • Harnessing for electrical cables wrapping in automotive application
  • Hand application


  • PRODUCT BENEFITS
  • Good resistance to abrasion, corrosion and moisture
  • Operating temperature -40 °C to +105 °C
  • Tape can be applied at low temperature (till -10°C)
  • High dielectric strength and good mechanical protection
  • Outstanding conformability
  • Environmentally friendly technology
  • Approved by IMQ, VDE, ÖVE : Certificates according to IEC 60454-3-1
  • Conforms to BS3924
  • Complies to REACH
  • Conforms to the technical requirements of BS4J10/BSEN60454
  • UL 510A - Recognized Tape OANZ2 : File E509583
  • Conforms to the European Directive 2011/65/EC (RoHS 2) and Commission Delegated Directive (EU)2015/863 (RoHS 3): (lead, chromium VI, mercury, cadmium free)
  • TECHNICAL PROPERTIES Unit Nominal Value
    Thickness mm 0.18
    Tensile Strength N/cm 35
    Elongation at Break % 180
    Adhesion to Steel N/cm 1.8
    Adhesion to Backing N/cm 1.8
    Dielectric Strength KV/mm 40
    Flammability --- Self extinguishing


    STANDARD PRESENTATION
  • Roll length : 20 and 33 metres
  • Roll width : 19 , 25mm and 50mm. 38mm available on request
  • Core : 32 mm Scapa branded cardboard core
  • Packaging : Cellowrapped with Scapa label and bar code
  • Colours : Black, White, Grey, Red, Blue, Yellow, others colours on request


  • RECOMMENDATIONS

    Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10°c and +25°c. Use within 24 months of receipt.

    The tape should be applied with sufficient tension to ensure an optimum bonding and a minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.

    Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.



    Contact us by phone e-mail for any adhesive tape requirement

    Web: www.printernational.co.uk ~ Tel: +44 (0)20 8050 8069 ~ E-mail: pr@printernational.co.uk