3105 is a specialist performance, polyethylene laminated waterproof cloth tape, coated with a pressure sensitive adhesive and specifically designed to meet the stringent technical requirements of the nuclear industry. 3105 is available in a unique black/white streaked colour effect.
APPLICATIONS
Specifically designed for use in the nuclear construction industry and can be supplied to meet the requirements of DEF STAN 81-25/3, if requested at time of ordering.
Temporary marking, sealing, joining, supporting and holding on nuclear fabrications during construction.
PRODUCT BENEFITS
Excellent waterproofing characteristics
Good corrosion resistance
Good abrasion resistance
Easy unwind for users
Distinctive black/white streaked appearance allows it to be easily identified as a low chlorine product,necessary for this market
Easy tear
Flexible and conformable
Low suphur and halogen content
Good low temperature performance
Very strong and robust
Can meet the stringent technical requirements of DEF STAN 81-25/3, if advised on ordering.
TECHNICAL PROPERTIES Unit
Nominal Value
Thickness
mm
0.30
Tensile Strength
N/cm
63
Adhesion to Steel
N/cm
5
Adhesion to Backing
N/cm
3
Service Temperature
°C
60
STANDARD PRESENTATION
Roll length : 50 metres
Roll width : 50mm
Core : Cardboard core
Packaging : Scapa branded, bulk packed using interleaving sheets between layers. Note: Information on stock items, non-standard sizes, and lead times is available on request.
RECOMMENDATIONS
Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. Service life will vary with conditions of use and is affected by climatic environment, but should not be less than two years from date of manufacture, if stored in a moderate climate and good conditions.Usage is recommended within one year.
Contact
us by phonee-mail for any adhesive tape requirement
