E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin
3259 PVC Single Sided Foam Tape

  • 3259 is primarily a foam compression sealant. The product is black. The foam is predominantly closed celled and is a medium hardness foam. An acrylic pressure sensitive adhesive is coated on one side, and the product has a paper release liner on the other non-adhesive face.
    3259 will act as a water-seal and air/dust seal when compressed.

  • Forms a compression water seal
  • For preventing electrolytic corrosion
  • For replacing Chloroprene foam seals
  • Forms a compression air / dust seal
  • For gap filling
  • For anti slip mounting
  • For cushioning

  • Minimum 30% compression required to effect a water seal
  • Service temperature -30 °C to +70 °C
  • Application temperature: +10 °C to + 40 °C
  • Shelf life of 1 year
  • Coated on one side with a high quality pressure sensitive acrylic adhesive
  • Good resistance to dilute acids & alkalis
  • Paper release liner on the non-adhesive face, reducing dimensional change during application
  • Very good Ultra violet {UV} Light resistant
  • Resistance to abrasion, corrosion and moisture
  • Suitable for indoor and outdoor environments
  • Medium hardness multi-purpose foam seal, with similar properties to Neoprene
  • No known hazards associated with this product
  • Pre-determined dimensional sealant reduces waste
  • Clean to use
  • Clean edge finish
    Shore Hardness {OO} Scale "00" 35
    Force To Compress By 30 % Ncm -2 2.8
    Compression Deflection After 1 Minute N/cm -2 2.4
    10 Minute 180 ° Peel Adhesion N/25mm 5
    Tensile Strength Ncm -2 48
    Elongation At Break % 160
    Thermal Conductivity (k) Wm -1 K -1 0.052

  • Conforms to European Directive 2000/53 EC (lead, chromium VI, mercury, cadmium free)
  • Fire rated to DIN 4102 part 1, B2

  • Formats : Logs, Rolls, Die Cuts, Spools
  • Thickness : 1.5; 3.0; 4.5; 6.0; 7.5; 9.0; 10.5; 12.0; 15.0 mm
  • Core : 76mm plastic core


    Surfaces must be clean, dry, free from grease and dirt.

    Recommended cleaning agent is Propan-2-ol, {IPA}. Please note manufacturer’s safety instructions should be followed and customers are recommended to ensure compatibility of the solvent with their substrate. Ideal bonding substrates are those which are: clean, dry, flat, smooth, dust free & non-porous.

    Low temperatures may increase the risk of condensation, reducing the tack of the product.
    Life expectancy will vary with temperature and humidity.
    Product may be applied by hand direct from a roll applying even pressure.

    Customers are recommended to make their own assessment of our products under their own conditions, for their own requirements.

    Contact us by phone e-mail for any adhesive tape requirement

    Web: ~ Sitemap ~ Tel: +44 (0)20 8050 8069 ~ E-mail: