General Description

Based on a repulpable paper carrier coated with a water soluble acrylic adhesive and a silicone release coat for easy unwind.

The tape can be used for many splicing purposes but specifically as a BACK SPLICE for splicing casting papers (on the non-release side) as used in the production of synthetic leather. Since the tape is repulpable with a water soluble adhesive it must be protected from humidity.

The tape offers excellent adhesion to casting papers for both PU and PVC synthetic leather production and will withstand the demanding temperature requirements encountered in this industry. 80-50 is particularly suited for PU Production. For PVC Castings, especially papers with a coating at the back or heavily embossed, 80-60 Kraft Paper Tape may be more suitable.

A particular benefit of 80-50 is that it is thinner than our other back splice tapes and therefore offers a high degree of flexibility and conformability.

As a repulpable tape it is sensitive to water and humidity and must be protected from it. For this reason each roll is individually wrapped. The tape should be used within 12 month of arrival at customer.
Note:
Adhesion can be improved by applying tape with a plastic applicator (available free on request). Under cold conditions a warm iron pressed over the tape will also improve adhesion. Storage: Use within 12 months and store in dry conditions and in original packaging. Protect from water / humidity / extreme temperatures and direct sunlight.

Average Specification
	Thickness - Adhesion on carton 600 cN/20mm Tensile Strength - 110 N/20mm Shear value 110N/4 cm2 Temperature Resistance 200 deg C ___________________________________________________________________________________
Dimensions Available
	75mm x 33m (12 rolls per case) Case details: 39x29x19cm / 5kg Available as Special Manufacture :50mm x 33m (18 rolls per case) ___________________________________________________________________________________