General Description

Based on a brown kraft paper coated with an acrylic adhesive and a special release coat for easy unwind.

The tape can be used for many splicing purposes but specifically as a BACK SPLICE for splicing casting/release papers (on the non-release side) as used in the production of synthetic leather. Especially recommended for PVC castings, heavily embossed papers and the newer type of smooth casting papers with surface coatings on the back.

The tape offers outstanding adhesion to casting papers for both PU and PVC synthetic leather production and will withstand the demanding temperature requirements encountered in this industry. A particular characteristic is the superior shear properties, which are so essential for splicing applications.

80-60 has been tested and highly approved by Arjo Wiggins as the best back splice tape for release papers (Ref: 7102).

Note:
Adhesion can be improved by applying tape with a plastic applicator (available free on request). Under cold conditions a warm iron pressed over the tape will also improve adhesion. Storage: Use within 12 months and store in dry conditions and in original packaging. Protect from water / humidity / extreme temperatures and direct sunlight.

Average Specification
	Thickness - Total 0.16mm Adhesion on Carton - 900 cN/20mm Shear value exceptionally high Tensile Strength 130 N/20mm Temperature Resistance 200 deg C (220 Degree C Short Term) ___________________________________________________________________________________
Dimensions Available
	75mm x 33m (12 rolls per case) Case details: 39x29x19cm / 6kg ___________________________________________________________________________________

---