E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin
43015 Double Sided Filmic Plate Mounting Tape 150 µm

  • 43015 is a 150 µm double sided tape especially designed for flexographic plate mounting. It is based on a transparent e-PVC carrier and features a high tack pressure sensitive rubber adhesive on both sides. 43015 uses a yellow corrugated filmic liner.

  • Mounting of flexographic photopolymer and rubber plates onto cylinder or sleeve.
  • The special grade rubber adhesive used on 43015 makes that product versatile enough to be used for mounting a variety of combinations of rubber or photopolymer plates with steel cylinders or sleeves
  • All applications where a 150 µm transparent tape is required to make up the correct plate/tape thickness.

  • Engineered rubber adhesive allows an easy repositioning during mounting operations and ensures a good bonding on a variety of surfaces.
  • Plates secured with 43015 will not move, even on extensive print runs.
  • Easy to remove in one piece after the print run.
  • Soft, PP corrugated liner for ease of lamination process and removal.
  • Will not leave any residues on most common surfaces, including grounded rubber plates.
    Thickness µm 150
    Peel adhesion on steel N/25 mm 13
    Temperature resistance °C Max 70

    Dimension Core Rolls per box
    310 mm x 4.5 m 2" 24
    310 mm x 25 m 3" 4
    620 mm x 25 m 3" 4
    Log 1280 mm x 25 m (useable width 1265 mm) 3" 4

    Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10 °C and 30 °C. Life expectancy can vary with temperature and humidity and a maximum of 1 year is recommended from the date of shipment.

    Contact us by phone, fax, e-mail for any adhesive tape requirement

    Web: ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: