Solutions for:
Synthetic Leather
Graphic Tapes
Printers Tapes
Double Sided Tape
Foam Tapes
Polyethylene Tape
Electrical Tapes
Masking Tapes
Self Amalgamating
Splicing Tapes
Cloth Tapes
Packaging Tapes
Special Purpose
Mandarin Czech Spanish Deutsch English
E-mail here
E-mail here E-Mail
637 Splicing and Sheathing Tape Red, 2.6 mils

  • 637 is a polyester film, single coated with an aggressive, high performance acrylic pressure sensitive adhesive. The colour is red.

  • Suitable for general splicing applications with exception of siliconised substrates.
  • Tear and rip repair.
  • Splicing and seaming of foam insulation joints and other sheathing materials.
  • Vapor sealing for interior and exterior housewrap systems.

  • Available with pinked edges for easy hand tearability.
  • Exhibits excellent aging and weathering properties.
  • High performance acrylic adhesive suitable for use over a wide range of low temperature and high heat / humidity conditions.
  • Easy unwind for users
  • PET carrier adds dimensional stability and strength.
  • Aggressive, tacky adhesive aids in splicing housewrap and sheathing barrier systems.
  • Red colour enables easy identification
  • Service temperature: -40°F to +200°F
    Total Thickness Mils (mm) 2.6 (0.066)
    Adhesive Thickness Mils (mm) 1.1 (0.028)
    Substrate Thickness (PET) Mils (mm) 1.5 (0.038)
    Peel Adhesion (PSTC 101 Mod/180°) Initial to SS (20 min dwell) Oz/Inch (N/25mm) 32 (8.8)
    Tensile Strength PSI 28 000
    Elongation % 110
    Maximum Continuous Use Temperature °F (°C) 200 (93)
    Minimum Application Temperature °C (°F) 10 (-12)

  • Colour : Red
  • Format : Rolls (pinked or straight edge); logs


    Application to Surface: Unwind adhesive film or tape and apply the adhesive side to the mounting surface. Apply firm pressure. Recommended application temperature to achieve best results is 65°F (18°C) or above. Proper bonding may not occur unless adhesive and surface material are both at 65°F (18°C) or above.
    1. When applying pressure sensitive adhesive films to any surface, be sure that the surface is free from oil or other surface contaminants such as powder, dust, or release agents. Adhesive performance should be carefully checked when used on substrates containing plasticizers.
    2. Shelf life is one year from date of shipment when stored in a cool dry place below 76°F (24°C). Rolls should be stored on end.

    Contact us by phone e-mail for any adhesive tape requirement

    Web: www.printernational.co.uk ~ Tel: +44 (0)20 8050 8069 ~ E-mail: pr@printernational.co.uk