Adhesive Tapes - 88-93 5.50 Mil Double Sided Silicone Adhesive Polyester Tape - PR International Ltd - self-adhesive (pressure sensitive)

Company Profile
Applications
Agents , Links
Clearance Corner
UK Office Directions
News and Events
Official Use Only
* Research
Age Regression
Plasmapheresis

Synthetic Leather

Double Sided Tape

Polyethylene Tape

Electrical Tapes

Self Amalgamating

Packaging Tapes

Special Purpose

PR INTERNATIONAL

88-93 5.50 Mil Double Sided Silicone Adhesive Polyester Tape

DESCRIPTION:
88-93 5.50 Mil Double Sided Silicone Adhesive Polyester Tape. Clear Double Sided Polyester Film Tape with PET Liner. 88-93 consists of a 1.00 mil polyester film coated with a high performance silicone PSA on each side. 88-93 offers high peel adhesion and exhibits excellent temperature resistance at elevated temperatures. 88-93 is used in a variety of applications, including general bonding of hard-coated and low surface energy substrates.

APPLICATIONS:

An 'overlapping splice' overlaps the end of one roll over the start of the next roll and this overlap is jointed together with a double-sided adhesive tape (adhesive on both sides of the tape), with a good balance of properties. Used for casting / release papers. In the processing of paper, board or foils the initial stage involves conveying these materials over transport rollers for further conversion. The casting / release papers come in rolls of 2m wide (or wider) and in roll lengths which can be several thousand meters long. The manufacturing process is continuous, which requires the end of one roll to be spliced quickly to the start of the next roll.

PRODUCT BENEFITS:

High Temperature. Good balanced adhesive system providing good bond strength during actual application. Silicone Rubber and Silicone Foam Fabrication

TECHNICAL PROPERTIES:

	Typical Value	Unit
Total Thickness (W/O Liner)	0.1397	mm
Carrier Thickness	0.0254	mm
Adhesive Thickness (Each Side)	0.0572	mm
Liner Thickness	0.0508	mm
Peel Adhesion (SS Panel)	18.07	N/ 25.4mm
Elongation	120	%
Tensile Strength	130	N/ 25.4mm
Temperature Range (Application)	- 54 to + 150	°C
Tensile strength	- 54 to + 260	°C

STANDARD PRESENTATION:

Roll length: 60 yards / 54.8 metres
Roll width: 1 inch / 25.4 mm
Packaging: Flow pack with label or plastic bag
Minimum Order Quantity: 540 rolls
Lead Time: 6 weeks

RECOMMENDATIONS:
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature about 20°C. Shelf Life 12 months.

Contact us by phone e-mail for any adhesive tape requirement

Web: www.printernational.co.uk ~ Tel: +44 (0)20 8050 8069 ~ E-mail: pr@printernational.co.uk